Zebralight SC62


Sorry this item is out of stock
Email Me When Back In Stock
Product thumb
Zebralight SC62
  • 80º spill
  • 12º hot spot
  • Head Diameter: 0.96" / 24.4 mm
  • Length: 3.8" / 96.5 mm
  • Weight: 1.4 oz. / 40 g
  • Operating Voltage Range: 2.7V - 4.2V
  • PID thermal regulated outputs (1000 and 620 Lm)
  • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
  • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
  • Builtin over-discharging protection (2.7V cutoff)
  • Durable electronic soft-touch switch
  • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
  • Precision machined unibody casing from premium grade  aluminum bar stocks
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Battery reverse polarity protection
  • Tempered optical grade glass
  • Orange peel textured reflector
Product thumb
Zebralight SC62

2 Reviews

5.0 Overall rating



fast shipping to Germany.



The Zebralight SC62 torch has a maximum output of 1000 lumens from the Cree XM-L2 LED and is powered by 1 x 18650 Li-ion battery. The light features a nominal CCT 6300K, providing a cool white light; the higher the Kelvin (K), the cooler the beam temperature.

In order to access the three main levels (High, Medium and Low), the SC62 has a basic operation system or a more advanced system to configure and set the desired levels. Each main level can be programmed to one of its two sub-levels. The second sub-level can be further programmed to a different level. 

One short click on the head torch turns on the light to High and again to switch it off; two short-click turns on the light to Mid and three short-click turns on the light to the special modes. Press and hold the switch (for over 0.6 seconds) to cycle through Low, then Mid and High, simply releasing at the desired level.

For more advance operation and configuration, press and hold to cycle from Low to Mid to High, and release at the desired level to set. Double click the switch to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorised after the light is turned off and through battery changes.

The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. When a configuration is finished, short click to turn off the light. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

Brightness Levels:
High: H1 1000 lumens - 2 hrs runtime or H2 620 lumens - 2.5 hrs runtime / 350 lumens - 3.9 hrs runtime / 160 lumens - 11 hrs runtime
Mid: M1 70 lumens - 30 hours runtime or M2 32 lumens - 66 hrs runtime / 12 lumens - 172 hrs runtime
Low: L1 3.7 lumens - 16 days runtime or L2  0.4 lumens - 2.5 months runtime / 0.06 lumens - 4.6 months runtime / 0.01 lumens - 5.5 months runtime

Plus Beacon Strobe Mode: 0.2 Hz Beacon at Low / 0.2 Hz Beacon at H1 / 4 Hz Strobe at H1 / 19 Hz Strobe at H1

Waterproof to IPX7.

Includes: Spare o-rings & pocket clip.