Zebralight SC600Fd MKIII Plus


Sorry this item is out of stock
Email Me When Back In Stock
Product thumb
Zebralight SC600Fd MKIII Plus
  • Head Diameter: 1.2" / 30 mm
  • Body Diameter: 0.98" / 25 mm
  • Length: 3.8" / 96 mm
  • Weight: 2.26 oz. / 64 g
  • Operating Voltage Range: 2.7V - 6.0V
  • Beam Type: Floody with frosted lens
Product thumb
Zebralight SC600Fd MKIII Plus

0 Reviews


The Zebralight SC600Fd MK III Plus flashlight has an impressive maximum output of 1500 lumens from the Cree XHP50 Neutral white LED and is powered by 1 x flat top IMR 18650 battery (not included). Featuring a nominal CCT 5000K, the torch has a neutral white beam; the higher the Kelvin (K), the cooler the beam tint.

The flashlight has a basic operation system to operate the main levels. One short click on the head torch turns on the light to High and again to switch it off; two short-click turns on the light to Mid and three short-click turns on the light to the special modes. Press and hold the switch (for over 0.6 seconds) to cycle through Low, then Mid and High, simply releasing at the desired level.

For more advance operation and configuration, press and hold to cycle from Low to Mid to High, and release at the desired level to set. Double click the switch to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorised after the light is turned off and through battery changes. 

The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. When a configuration is finished, short click to turn off the light. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

Brightness Levels:
High: H1 1500 lumens - 2.3 hrs runtime or H2 666 lumens - 2.7 hrs runtime / 429 lumens - 2.9 hrs runtime / 270 lumens - 4.1 hrs runtime
Mid: M1 100 lumens - 12.5 hrs runtime or M2 34 lumens - 36 hrs runtime / 19 lumens - 2.6 days runtime / 10.4 lumens - 4.6 days runtime
Low: L1 2.9 lumens - 15.5 days runtime or L2 0.76 lumens - 1.9 months runtime / 0.37 lumens - 2.7 months runtime / 0.18 lumens - 4 months runtime

Plus Beacon Strobe mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1

Waterproof to IPX-8.

Includes: pocket clip, spare o-rings.
**PLEASE NOTE: Battery is not included**