Zebralight H604W


Sorry this item is out of stock
Email Me When Back In Stock
Product thumb
Zebralight H604W
  • Nominal CCT: 4500K
  • CRI: 80+
  • Operating Voltage Range: 2.7V - 6.0V
  • Beam Type: 120º flood
  • Head Diameter: 0.96" / 24.5 mm
  • Length: 3.85" / 97.8 mm
  • Weight: 1.3 oz / 38 g (excluding battery)
  • PID thermal regulated outputs (three highest output levels)
  • Built-in battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cut-off
  • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
  • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
  • Durable electronic soft-touch switch
  • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes
  • Precision machined unibody casing from premium grade aluminum bar stocks
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Tempered optical grade glass
  • Battery reverse polarity protection
Product thumb
Zebralight H604W

0 Reviews


The Zebralight H604w head torch has a maximum output of 1400 lumens from the Cree XHP35 Neutral White LED and is powered by 1 x 18650 Li-ion battery. The headlamp has a nominal CCT of 4500K, providing a warm beam; the higher the Kelvin (K), the cooler the beam temperature.

The H604w head torch has three main levels (High, Medium and Low) in addition to a beacon and strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

One short click on the head torch turns on the light to High and again to switch it off; two short-click turns on the light to Mid and three short-click turns on the light to the special modes. Press and hold the switch (for over 0.6 seconds) to cycle through Low, then Mid and High, simply releasing at the desired level.

For more advance operation and configuration, press and hold to cycle from Low to Mid to High, and release at the desired level to set. Double click the switch to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorised after the light is turned off and through battery changes. 

The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. When a configuration is finished, short click to turn off the light. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

Brightness Levels:
High: H1 1400 lumens - 2.8 hrs runtime or H2 875 lumens - 2.9 hrs runtime / 502 lumens - 3.2 hrs runtime / 264 lumens - 6.3 hrs runtime
Medium: M1 127 lumens - 13.8 hrs runtime or M2 56.4 lumens - 28 hrs runtime / 22.9 lumens - 2.8 days runtime / 8.5 lumens - 7.3 days runtime
Low: L1 2.9 lumens - 18.5 days runtime or L2 0.92 lumens - 1.5 months runtime / 0.26 lumens - 3 months runtime / 0.07 lumens - 4 months runtime

Plus Beacon Strobe mode: 0.2 Hz Beacon at Low / 0.2 Hz Beacon at H1 / 4 Hz Strobe at H1 / 19 Hz Strobe at H1

Waterproof to IPX-8.

Includes: headband with removable top strap and silicone holder, spare o-rings and pocket clip.
**Please note, batteries are not included**