Zebralight H602 Headlamp

customer rated 5 out of 5 customer rated 5 out of 5 customer rated 5 out of 5 customer rated 5 out of 5 customer rated 5 out of 5 Rated 5 / 5 (1 review)
Zebralight H602 Headlamp
additional image for H602 Headlamp
additional image for H602 Headlamp
£82.95

Free Flashaholics Photon Torch with orders over £50

H602 : £82.95
In Stock
  • Description
  • Specification
  • Reviews

Description

The Zebralight H602 headlamp has a maximum output of 1090 lumens from the Cree XM-L2 and can be powered by 1 x 18650 Li-ion battery. The head torch has a nominal CCT 6300K, making it give out a cool white light; the higher the Kelvin (K), the cooler the beam temperature.

The H602 head torch has three main levels (High, Mid and Low) in addition to a beacon and strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

One short click on the head torch turns on the light to High and again to switch it off; two short-click turns on the light to Mid and three short-click turns on the light to the special modes. Press and hold the switch (for over 0.6 seconds) to cycle through Low, then Mid and High, simply releasing at the desired level.

For more advance operation and configuration, press and hold to cycle from Low to Mid to High, and release at the desired level to set. Double click the switch to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorised after the light is turned off and through battery changes.

The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. When a configuration is finished, short click to turn off the light. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

Brightness Levels:
High:  H1 1090 lumens - 2 hrs runtime or H2 660 lumens - 2.5 hrs runtime / 350 lumens - 3.9 hrs runtime / 160 lumens - 11 hrs runtime
Medium: M1 70 lumens - 30 hrs runtime or M2 32 lumens - 66 hrs / 12 lumens - 172 hrs runtime
Low: L1 3.7 lumens - 16 days runtime or L2 0.4 lumens - 2.5 months runtime / 0.06 lumens - 4.6 months runtime / 0.01 lumens - 5.5 months runtime

Plus Beacon Strobe Mode: 0.2 Hz Beacon at Low / 0.2 Hz Beacon at H1 / 4 Hz Strobe at H1 / 19 Hz Strobe at H1

Waterproof to IPX-7.

Includes: Spare o-rings & headband.

Specification

  • Operating Voltage Range: 2.7V - 4.2V
  • Head Diameter: 0.95" / 24.2 mm
  • Length: 3.82" / 97 mm
  • Weight: 1.05 oz. / 43 g
  • PID thermal regulated outputs 
  • Battery capacity indicator 
  • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
  • Builtin over-discharging protection (2.7V cut off)
  • Durable electronic soft-touch switch
  • Smart user interface 
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Battery reverse polarity protection
  • Tempered optical grade glass
  • Waterproof to IPX-7

customer rated 5 out of 5customer rated 5 out of 5customer rated 5 out of 5customer rated 5 out of 5customer rated 5 out of 5   29/08/2017 - Mr Segui Vidal, Campanet
 

You may also like

Nano Oil

£14.95

New i2 Charger

£17.95

Tri-Angle Sharpmaker

£79.95

18650 3400 mAh Li-ion Battery

£13.95