Zebralight H600Fc MkIII Headlamp

Zebralight H600Fc MkIII Headlamp
additional image for H600Fc MkIII Headlamp
additional image for H600Fc MkIII Headlamp
£89.95

Free Flashaholics Photon Torch with orders over £50

H600FC : £89.95
In Stock
  • Description
  • Specification

Description

The Zebralight H600Fc MKIII has a maximum output of 800 lumens from the Cree XM-L2 LED and is powered by 1 x 18650 battery (not included). The head torch has a nominal CCT 4000K providing a warm, neutral light; the higher the Kelvin (K), the cooler the beam temperature.

In addition to the three main levels of High, Mid and Low, the H600Fc features a beacon and strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

One short click on the head torch turns on the light to High and again to switch it off; two short-click turns on the light to Mid and three short-click turns on the light to the special modes. Press and hold the switch (for over 0.6 seconds) to cycle through Low, then Mid and High, simply releasing at the desired level.

For more advance operation and configuration, press and hold to cycle from Low to Mid to High, and release at the desired level to set. Double click the switch to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorised after the light is turned off and through battery changes.

The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. When a configuration is finished, short click to turn off the light. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

Brightness Levels:
High: H1 800 lumens - 2 hrs runtime or H2 515 lumens - 2.5 hrs runtime / 234 lumens - 3.9 hrs runtime / 107 lumens - 11 hrs runtime
Medium: M1 57 lumens - 30 hrs runtime or M2 24 lumens - 66 hrs runtime / 8.3 lumens - 172 hrs runtime
Low: L1 2.4 lumens - 16 days runtime or L2 0.33 lumens - 2.5 months runtime / 0.05 lumens - 4.6 months runtime / 0.01 lumens - 5.5 months runtime

Plus Beacon Strobe mode: 0.2 Hz Beacon at Low / 0.2 Hz Beacon at H1 / 4 Hz Strobe at H1 / 19 Hz Strobe at H1

Waterproof to IPX-7.

Includes: headband with rubber mount

Specification

  • Operating Voltage Range: 2.7V - 6.0V
  • Beam Type: Floody beam with frosted lens
  • 90º Beam Spread
  • Head Diameter: 0.95" / 24.2 mm
  • Length: 3.85" / 97.8 mm
  • Weight: 1.4 oz. (excluding battery and headband)
  • PID thermal regulated outputs
  • Battery capacity indicator
  • Automatic stepping down from High to Medium and Medium to Low when battery capacity is low
  • Built in over-discharging protection (2.7V cut off)
  • Durable electronic soft touch switch
  • Smart user interface
  • Precision machined unibody casing from premium grade aluminium bar stocks
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminium casing
  • Durable natural hard anodised finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Battery reverse polarity protection
  • Tempered optical grade glass

You may also like

Get-A-Way Driver Torx

£14.95

18650 Li-ion Battery (3200mAh) NL188

£15.95

Digicharger D2 EU

£24.95

SF XM-L2 Cool White Drop-In

£24.95