BRANDS

• 4 SEVENS
• ARMYTEK
• BALDER
• DEREELIGHT
• EAGLETAC
• FENIX
• GLO TOOB
• HDS SYSTEMS
• ITP LIGHT
• ICON
• JETBEAM
• KLARUS
• LED LENSER
• LUMAPOWER
• LUMINTOP
• MAGLITE
• MAXPEDITION
• NITECORE
• OLIGHT
• PELICAN
• PHOTON MICRO
• ROFIS
• SOLARFORCE
• SUNWAYMAN
• SUREFIRE
• THRUNITE
• WOLF EYES
• ZEBRALIGHT

CATEGORIES

• BATTERIES
• ACCESSORIES
• LANTERNS
• MULTI TOOLS
• GUN LIGHTS
• 550 PARACORD
• BIKE MOUNT

> ZEBRALIGHTS > SC600W

ZebraLight SC600W

The Zebralight SC600W features a Cree XM-L Neutral White (Nominal CCT 4200K) for improved colour rendition.

Powered by a single 18650 battery, the SC600 is small enough to fit into a pocket yet out performs lights several times bigger.

Three user selectable modes (High, Medium and Low). Each mode can be configured to one of the two sub-levels:

• High: H1 430Lm with 645Lm turbo in the first 5 min (2hrs) or H2 172Lm (5.9hrs) / 284Lm (3hrs) / 430Lm (2.1hrs) / 4Hz Strobe
• Medium: M1 56Lm (18hrs) or M2 18Lm (50hrs)
• Low: L1 2.4Lm (280hrs) or L2 0.09Lm (80days)

Powered by a single 18650 battery. Includes removable pocket clip.

In Stock Now: £79.95 Free UK Delivery

• LED: Cree XM-L Neutral White (Nominal CCT 4200K)
• User Selectable Levels: 3 main level (High, Medium and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High (H2) can be further configured to different brightness levels or strobes.
• High: H1 430Lm with 645Lm turbo in the first 5 min (2hrs) or H2 172Lm (5.9hrs) / 284Lm (3hrs) / 430Lm (2.1hrs) / 4Hz Strobe
• Medium: M1 56Lm (18hrs) or M2 18Lm (50hrs)
• Low: L1 2.4Lm (280hrs) or L2 0.09Lm (80days
• Runtimes are tested using Panasonic NCR18650 (2900mAH) batteries. Light output are out the front (OTF) values. All levels are current regulated.
• Operating Voltage Range: 2.7V - 4.2V
• Battery: One 18650 size (up to 67mm long) 3.6/3.7V Li-ion rechargeable battery. Batteries are not included in the package.
• Parasitic Drain: Negligible (equivalent to 13 years)
• Beam Type: 80 degree spill 10 degree hot spot
• Dimensions:
• Bezel Diameter: 30mm
• Body Diameter: 25.4mm
• Length: 107mm
• Weight 2.95 oz(87.2 g) without battery
• Lanyard ring
• Step regulation: High steps down to the user selected Med or Med steps down to the user selected Low when battery capacity (not necessary the voltage) is low
• Built in over-discharging protection with 2.7V cutoff
• Side click electronic soft-touch switch
• Smart user interface provides fast and easy access to all brightness levels
• Precision machined uni-body casing from premium grade Alcoa aluminum bar stock
• Proprietary heat sinking design bonds the LED board directly to the uni-body aluminum casing, providing unblocked thermal paths to most of the surface area.
• Durable natural hard anodized finish (Type III Class I)
• Ultra clear lens with anti-reflection coatings on both sides
• Orange peel textured reflector
• Battery power can be locked out by slightly unscrewing the tail cap
• to prevent unwanted activations or parasitic drain
• Waterproof to IPX8 (2 meters, 30 minutes)

Operation:

This light has 3 main levels (High, Medium, and Low). Each main level can be configured to one of its two sub-levels. The second sub-level of the High can be further configured to different brightness levels or strobes.

Basic Operation

• Short click turns on the light to High or turns off the light.
• Long click (press and hold for about 0.7 seconds) turns on the light to Low.

Advanced Operation and Configuration

• Short click turns on the light to High. Short click again quickly to cycle from High to Medium, and Low.
• Press and hold to cycle from Low to High, release to set. When press and hold, the light always cycle from Low to High regardless which level you are currently in.
• Double click to toggle and select between the two sub-levels for that main level. Sub-level selections (except the strobe) for the 3 main levels are memorized after the light is turned off and through battery changes.
• The second sub-level of the High can be configured after 6 double clicks. Double click (starting with the 7th) to cycle and select different brightness levels or strobes. Short click to turn off the light when finishing configurations. The selections for the second sub-level of the High are memorized after the light is turned off and through battery changes