BRANDS
- 4 SEVENS
- ARMYTEK
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES

> THRUNITE > CATAPULT V2
THRUNITE Catapult V2 Cree XM-L T6 BIN LED
CLICK HERE TO SEE THE NEW THRUNITE CATAPULT V3
Improvements over the original version include higher output, stainless steel bezel for increased protection and the ability to be powered by both CR123A and lithium-ion batteries.
The beam of the Catapult 2 has been optimised for long throw, while still providing a use useful amount of side spill, making it versatile and adaptable to any situation. Two modes of output: 700+ ANSI lumens high, and 170 ANSI lumens low allow the user to balance output and runtime.
Also in the box: Spare tail switch, 3 spare o-rings, wrist lanyard and spare switch cover in green.
Catapult Version 3 in stock now.


Please note: The 18650 battery extension tube should be fitted between the head of the torch and the main body tube, not between the main body tube and tail switch.
- The newest XM-L LEDwith T6 bin
- Stainless steel bezel
- Maxium. 700+ OFT lumens
- Low Output: approx.177 OFT lumens
- 2 Levels of output
- 54mm smooth polished parabolic reflector
- Low = 550+/-10mA; High = 2.9-3A
- Mil-Spec Type III Hard Anodizing
- Constructed from 7075AL for superior durability
- Length: 185mm
- Head diameter: 58mm
- Body diameter: 31mm
- Weight: 390g. (Extension tube excluded)
- Tactical momentary-on forward click switch
- IPX-8 Water/Dust Resistance
- Tail cap design allows the light to tail stand
- Shatter resistant ultra clear lens with double-sided multilayer AR coating
- BATTERY OPTIONS: 2 x 18650 / 2 x 17670 / 4 x CR123/ 2 x 18650. (2 x CR123 / 2 x 16340 for low stage only)
- SPECIAL OFFER BATTERY TUBE: Now also allows the use of 3 x CR123A batteries in a 25mm diameter body tube! Included free of charge with every Catapult V2.

Operation Press lightly for momentary on and fully press for switch on, turn the bezel to select low or high output. Tighten for high and loosen for low.
SPECIAL OFFER FOR LIMITED PERIOD: Free 3 x CR123A body tube with every Catapult V2. Allows the use of 3 CR123A batteries in a smaller diameter body tube (25mm instead of 30mm) able to power the light on full brightness. This is in addition to the regular body and extension tube, giving you even more ways to power this incredible light. Get them quick while supplies last!