Zebralight SC32

£69.95

Sorry this item is out of stock

Add These?

Nitecore New i2 Charger
+ £20.95
Nitecore RCR123A Li-ion Battery (950 mAh) NL169
+ £10.45
Email Me When Back In Stock
Product thumb
Zebralight SC32
£69.95
  • Operating Voltage Range: 2.7V - 4.2V
  • 80º Spill
  • 12º Hot Spot
  • Head Diameter: 0.94" / 24 mm
  • Length: 2.6" / 66 mm
  • Weight: 1.34 oz. / 38 g 
  • PID thermal regulated output at the H1 level
  • Battery capacity indicator
  • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
  • Built in over-discharging protection
  • Durable electronic soft-touch switch
  • Smart user interface 
  • Precision machined unibody casing from premium grade  aluminum bar stocks
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Sealed and potted LED driver circuitry
  • Battery reverse polarity protection
  • Tempered optical grade glass
  • Preinstalled bezel down pocket clip
  • Orange peel textured reflector
Product thumb
Zebralight SC32
£69.95

1 Review

5.0 Overall rating

5
1
4
0
3
0
2
0
1
0

05/02/2021

An excellent, powerful and compact torch. Perfect for leaving in a pocket, just in case.

Description

The Zebralight SC32 hand held flashlight has a maximum output of 480 lumens from the Cree XM-L2 LED and can be powered using either 1 x CR123 single use battery or 1 x RCR123 (16340) Li-ion, rechargeable cell.

Featuring a nominal CCT 6300K, the SC32 provides a cool white beam. The higher the Kelvin (K), the cooler the beam temperature.

The torch offers three main brightness levels plus a beacon strobe mode. Each main level can be programmed to one of its two sub-levels and the second sub-level can be further programmed. 

The flashlight has a basic operation system to operate the main levels. One short click on the head torch turns on the light to High and again to switch it off; two short-click turns on the light to Mid and three short-click turns on the light to the special modes. Press and hold the switch (for over 0.6 seconds) to cycle through Low, then Mid and High, simply releasing at the desired level.

For more advance operation and configuration, press and hold to cycle from Low to Mid to High, and release at the desired level to set. Double click the switch to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorised after the light is turned off and through battery changes.

The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. When a configuration is finished, short click to turn off the light. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

Brightness Levels:
High: H1 480 lumens - 1.4 hrs runtime or H2 262 lumens - 1.6 hrs runtime / 108 lumens - 4.1 hrs runtime
Medium: M1 54 lumens - 11 hrs runtime or M2 24 lumens - 26 hrs runtime / 9 lumens - 70 hrs runtime
Low: L1 2.7 lumens - 8 days runtime or L2 0.4 lumens - 38 days runtime / 0.05 lumens - 2.5 months runtime / 0.01 lumens - 3 months runtime

Plus Beacon Strobe mode: 0.2 Hz Beacon at Low / 0.2 Hz Beacon at H1 / 4 Hz Strobe at H1 / 19 Hz Strobe at H1

Waterproof to IPX-7.

Includes: Spare o-rings, 1 x CR123 single use battery.