BRANDS
- 4 SEVENS
- ARMYTEK
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES
Nitecore Infilux IFE1 XP-G R5
New for 2010 Nitecore have released their Infilux range of lights, which feature smart ring infinite brightness adjustment. With no pre-defined steps, the ring rotates smoothly allowing the user to select the exact brightness setting required.
The IFE1 is powered by one CR123A battery and is also compatible with 3.7V Li-Ion Cells. Maximium output of 285 lumens with strobe function, also accessed via the selector ring.
Other features include removable pocket clip, stainless steel bezel and hard anodised finish
In Stock Now: £109.95 Including Free Batteries
- Infilux line is Nitecore's new top product line.
- Compatible with the Surefire E Series bodies.
- Using the newest CREE CP-G R5 LED.
- Includes strobe mode.
- IFE1 uses one CR123A battery
Features:
SmartRing II Infinitely Variable Digital-controlled Brightness System
Premium CREE XP-G (R5) LED, Max output 260 lumens
Made from military grade aluminum alloy, extremely strong
Mil-Spec Type III Hard Anodized finish, very durable
Titanium Alloy Bezel Retaining Ring to avoid damage by dropping
Durable Titanium Alloy Clip
Stainless Steel Tail Retaining Ring to prevent switch from damage
Anti-rolling Rugged Design
Specification
Power: 1*CR123 battery(IFE1), 2*AA battery(IFD2)
Output & Runtime:
Maximum output 260 lumens, for about 50 minutes;
Minimum output 0.5 lumens, for about 100 hours
Effective illumination distance: 220 meters
Modes: Infinitely variable digital-controlled brightness from 0.5 to 260 lumens plus strobe
Dimensions:
Bezel diameter 23mm; tube diameter 20mm; total length 103mm
Weight: 65g
Waterproof Standard: IPX-8 (water-resistance for 1 hour under water at a depth of 1.5 meters)
User Guide:
Insert Battery
Please follow the instructions of the diagram below to ensure the battery is inserted correctly and screw back the tail cap tight. Ensure the battery is inserted in the correct direction. Inserting the battery the wrong way can damage the light.
Momentary On
Partially depress the tail cap switch for momentary activation, release and the light will turn OFF.
Constant On
Fully depress the tail cap switch to ¡°click on¡± position and release for constant light, which will be ON till you fully depress the tail cap switch again to the ¡°click off¡± position.
Safety Lock-out
For long term storage or to prevent accidental light activation, loosen the tail cap half of a turn in counter-clockwise direction to enter the safety lock-out status, which disables the switch, and the light will stop working even the switch is depressed. To activate the light when needed, simply rotate the tail cap tight back in clockwise direction.
Brightness Selection and Strobe
When the light is on, rotate the SmartRing II near the bezel, the brightness will change. Rotate the SmartRingin counter-clockwise direction and the brightness will increase step by step till the Max. Rotate the SmartRing in the clockwise direction and the brightness will decrease step by step till the Min.When the brightness decreases, the runtime of the light increases. The light can sustain continuous use for up to 100 hours at Min and 50 minutes at Max.