BRANDS
- 4 SEVENS
- ARMYTEK
- BALDER
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- ROFIS
- SOLARFORCE
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES
EagleTac M3C4 Cree MC-E (Black)
The Eagletac M3C4 Cree MC-E LED flashlight features
a new dial operated switch, located behind the head to toggle the light on/off, adjust the brightness output, and access the hidden strobe/fast beacon/SOS features. Maximum output 625 'out the front' lumens with wide beam pattern.
Variable output and single handed operation make this a versatile light for any situation. Cool White 6000K LED.
Please note, this model has reverse polarity protection, which only allows the use of button top cells. Recommended 18650 cells are the AW 18650 2200mah.
Included accessories: Diffuser filter, tail click switch and battery magazine, wrist lanyard, battery tubes and spare o-rings. YRGB filter kit (yellow for fog and rain) is optional in the drop down list below (cost extra £8).
In Stock Now: £118.95 including free CR123 batteries
- CREE MC-E M LED (high output and smooth beam. No dark center hole is detected under the new ET55 reflector)
- O.T.F. lumen output: 16/52/148/312/625
- LED lumen output: 20/65/185/390/750
- Battery: two 18650 rechargeable or four CR123A primary
- Runtime: 1.5/3.5/8/28/100+ hours
- New one-piece flashlight head design (from the top of the knurling area to the battery contact point behind the head). This allows optimal LED heat sink capability and operational reliability. The flashlight head is not sealed and user can gain access to the inside of the lens and reflector.
- New durable hard anodization coating Available in HAIII finish(40 μm in thickness and 350-380 HV in hardness).
- New Reflector design in light orange peel (L.O.P.) finish
- The tail-stand tail-cap receives a new durable protective coating. The package also come with a para-cord lanyard with darken holding clip that fits in the tail-cap lanyard hole. The controller ring also receives the new durable protective coating.
- The Flashlight head and the body are o-rings and square-rings sealed for operating in harsh and wet environments.
- Reverse battery polarity protection has been implemented on the battery tray for each battery channel.
- The water-proof tail-cap now uses stainless steel 304 mounting screws with hex heads
Operation:
Dial the operational ring to turn the flashlight on/off, adjust between the five brightness levels, and access the three hidden modes (strobe, fast beacon, sos). To access the hidden blinking modes, turn the ring from the turbo mode to the off/standby mode, then back to the turbo mode.