BRANDS
- 4 SEVENS
- ARMYTEK
- BALDER
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- ROFIS
- SOLARFORCE
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES
4sEVENS qUARK "X" 123² - Cree XM-L
The Quark "X" series have received a powerful upgrade - CREE's latest XM-L emitters! The XM-L puts out even more lumens in a wider area, reducing the tunnel-vision effect from a concentrated hotspot.
Powered by two CR123A batteries. Maximum output of 360 lumens.
Featuring five power levels plus strobe and SOS setting.
Includes belt holster, lanyard, finger grip and spare o-rings.
Temp out of stock: £55.95 Including free Batteries
Specifications
- Powered by: 2 CR123A batteries (included)
- LED Emitter: Premium Cree XM-L
- Voltage range: 3.0V ~ 9.0V
- Dimensions
- Length: 4.5 inches
- Diameter: 0.86 inches
- Weight: 1.8 ounces
- 5 Current Regulated Output Levels
- 3 Flash modes: Strobe, SOS, Beacon
- Square threads for lifetime smooth operation
- Type III Hard Anodized finish
- Fully knurled
- Reversible/Removable Clip
- Flexible & secure hand grip accessory
- IPX-8 Waterproofing
- Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
- T-6061 Aircraft-grade Aluminum Body
- Stands on Tail (candle mode)
Typical Output Levels and Runtimes + (LED drive current)
Moonlight: 0.3 OTF lumens for 25 days
Low: 3 OTF lumens for 5 days
Medium: 65 OTF lumens for 11 hours
High: 160 OTF lumens for 4 hours
Max: 360 OTF lumens for 1.7 hours (990ma)
Strobe: 360 OTF lumens for 3.4 hours
Beacon:0-360 OTF lumens pulse for 16 hours
Operation
Operating your Quark "X" 123² is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the 'head' of the light) and tail cap are tightened, then depress the tail cap button fully so that it 'clicks' and the light turns on.
The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That's it.
You can also cycle through the Quark's other modes just as easily. Lightly depress the button momentarily (you don't need to 'click' it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:
Loosened Bezel: Moonlight - Low -> Medium - High - SOS - Beacon
Tightened Bezel: Max - Strobe