BRANDS
- 4 SEVENS
- ARMYTEK
- BALDER
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- ROFIS
- SOLARFORCE
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES
> 4SEVENS > QUARK 123 2 TURBO X
4Sevens Quark 123² Turbo X
The 4Sevens Quark 123² Turbo X has all of the same great features as the original Quark 123² Turbo and features CREE's new XM-L emitter! The XM-L is a slightly larger emitter, so the Turbo X received an updated, larger smooth reflector to maintain a great balance between light throw distance and spill area.
he Turbo X features both current and thermal regulation - this means it can take serious abuse and be exposed to harsh conditions, but it will automatically control its output to protect its own guts. That means you don't worry about your light - you just use it.
Powered by two CR123A batteries with a maximum output of 450 lumens.
Includes belt holster, lanyard, finger grip and spare o-rings.
Temp out of stock: £62.95 Including free Batteries
Specifications
- Powered by: 2 CR123A batteries (included)
- LED Emitter: Premium Cree XM-L
- Voltage range: 3.0V ~ 9.0V
- Dimensions
- Length: 5.2 inches
- Diameter: 1.52 inches (head)
- Diameter: 0.86 inches (body
- Weight: 4.7 ounces
- 5 Current Regulated Output Levels
- 3 Flash modes: Strobe, SOS, Beacon
- Momentary Activation
- Level Memorization
- Square threads for lifetime smooth operation
- Type III Hard Anodized finish
- Fully knurled
- Reversible/Removable Clip
- Flexible & secure hand grip accessory
- IPX-8 Waterproofing
- Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
- T-6061 Aircraft-grade Aluminum Body
Typical Output Levels and Runtimes + (LED drive current)
Moonlight: 0.3 lumens for 20 days, (1ma)
Low: 8 lumens for 2.6 days (10ma)
Medium: 60 lumens for 13 hours (50ma)
High: 260 lumens for 3 hours (250ma)
Max: 450 lumens for 1.5 hours (990ma)
Strobe: 450 lumens for 3 hours
SOS: 450 lumens for 6 hours
Beacon: 0-450 lumens pulse for 15 hours
Operation
Operating your 4 Sevens Quark 123 Turbo X is simple. Insert the battery with the positive side (+) towards the head. Make sure the head and tail cap are tightened, then depress the tail cap button fully so that it "clicks" and the light turns on. You can also press the tail cap lightly (you don't have to "click" it on) to activate the light momentarily. This is known as the momentary-on feature.
The Quark 123 Turbo X can memorize any two modes of output, from its eight total modes, to be instantly available. These two memorized modes are accessed by either tightening or loosening the head (for example, tight can be Max, and loose can be Low).
Programming Modes:
To have your Quark 123 Turbo X memorize a different mode, turn it on and loosen the head by a half-turn. Then, tighten the head at least four times rapidly (twisting it tight, then loose, then tight, etc., four times). After the fourth time, leave the head tight or loose depending which position you want to program.
After three seconds, the light will flash, signaling it is ready to be programmed. Cycle through the eight available modes by clicking the tail cap off and on. The mode sequence is as follows:
Moonlight - Low - Medium - High - Max - SOS - Strobe - Beacon
Once you find your desired mode, leave that mode on for ten seconds and the light will flash again, confirming that the mode has been memorized. To cancel programming before it flashes, turn the light off for three seconds.