BRANDS
- 4 SEVENS
- ARMYTEK
- BALDER
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- ROFIS
- SOLARFORCE
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES
> 4SEVENS > QUARK AA 2 S2
4sEVENS qUARK AA 2 S2
The 4Sevens Quark AA 2 S2 is powered by two AA batteries and has a maximum output of 177 ANSI lumens. Comes packaged in a smart presentation box with free Duracell batteries.
Featuring five power levels plus strobe and SOS setting. Maximum output of 177 lumens on full power and new moonlight setting of 0.6 lumens, which will run for 53 days on a single set of batteries!
One of the most popular 4 Sevens lights, which is ideal for every day carry, traveling or even as a bike light when used with the Twofish Lockblock bike mount.
Includes belt holster, removable pocket clip, lanyard, finger grip and spare o-rings.
Temp out of stock: £48.95 Including free Batteries
Specifications
- Powered by 2 AA batteries (included)
- LED Emitter: Premium Cree XP-G S2
- Voltage range: 0.9V ~ 4.2V
- 5 Current Regulated Output Levels
- 3 Flash modes: Strobe, SOS, Beacon
- Square threads for lifetime smooth operation
- Type III Hard Anodized finish
- Fully knurled
- Reversible / Removable Clip
- Flexible & secure hand grip accessory
- IPX-8 Waterproofing
- Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
- T-6061 Aircraft-grade Aluminum Body
- Stands on Tail (candle mode)
Typical Output Levels and Runtimes + (LED drive current)
Moonlight: 0.6 lumens for 53 days (1ma)
Low: 4 lumens for 5 days (10ma)
Medium: 19 lumens for 24 hours (50ma)
High: 83 lumens for 5 hours (250ma)
Max: 177 lumens for 42 minutes (350ma)
Strobe: 177lumens for 2.5 hours
Beacon: 0-177 lumens pulse for 18 hours
Operation
Operating your Quark AA 2 is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the 'head' of the light) and tail cap are tightened, then depress the tail cap button fully so that it 'clicks' and the light turns on.
The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That's it.
You can also cycle through the Quark's other modes just as easily. Lightly depress the button momentarily (you don't need to 'click' it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:
Loosened Bezel: Moonlight - Low - Medium - High - SOS - Beacon
Tightened Bezel: Max - Strobe
Once the Quark has been turned off for at least three seconds, it will revert to the first level of output in the sequence, either Moonlight or Max.