BRANDS

• 4 SEVENS
• ARMYTEK
• DEREELIGHT
• EAGLETAC
• FENIX
• GLO TOOB
• HDS SYSTEMS
• ITP LIGHT
• ICON
• JETBEAM
• KLARUS
• LED LENSER
• LUMAPOWER
• LUMINTOP
• MAGLITE
• MAXPEDITION
• NITECORE
• OLIGHT
• PELICAN
• PHOTON MICRO
• SUNWAYMAN
• SUREFIRE
• THRUNITE
• WOLF EYES
• ZEBRALIGHT

CATEGORIES

• BATTERIES
• ACCESSORIES
• LANTERNS
• MULTI TOOLS
• GUN LIGHTS
• 550 PARACORD
• BIKE MOUNT

> 4SEVENS > QUARK AA 2 TURBO

4Sevens Quark AA 2 Turbo S2 Limited Edition

The 4Sevens Quark AA Turbo features a larger, deeper reflector for improved throw.

Tactical user interface allows the user to program both primary and secondary outputs.

Powered by two AA batteries with a maximum output of 190 lumens.

Five output levels plus strobe settings.

Includes belt holster, lanyard, finger grip and spare o-rings.

In Stock Now: £62.95 Including free Battery

Specifications

• Powered by: 2 AA batteries (0.9V~4.2V total) (included)
• LED Emitter: Premium Cree S2
• Voltage range: 0.9V ~ 4.2V
• Dimensions
• Length: 6.2 inches
• Diameter: 1.18 inches
• Weight: 3.0 ounces
• 5 Current Regulated Output Levels
• 3 Flash modes: Strobe, SOS, Beacon
• Momentary Activation
• Level Memorization
• Square threads for lifetime smooth operation
• Type III Hard Anodized finish
• Fully knurled
• Reversable/Removable Clip
• Flexible & secure hand grip accessory
• IPX-8 Waterproofing
• Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
• T-6061 Aircraft-grade Aluminum Body

Typical Output Levels and Runtimes + (LED drive current)

Moonlight: 0.6 lumens for 30 days (1ma)
Low: 4 lumens for 5 days (10ma)
Medium: 22 lumens for 24 hours (50ma)
High: 85 lumens for 5 hours (250ma)
Max: 190 lumens for 47 minutes(700ma)
Strobe: 190 lumens for 1.5 hours
Beacon: 0-190 lumens pulse for 18 hours

Operation

Operating your 4 Sevens Quark AA Tactical is simple. Insert the battery with the positive side (+) towards the head. Make sure the head and tailcap are tightened, then depress the tailcap button fully so that it "clicks" and the light turns on. You can also press the tailcap lightly (you don't have to "click" it on) to activate the light momentarily. This is known as the momentary-on feature.

The Quark Tactical can memorize any two modes of output, from its eight total modes, to be instantly available. These two memorized modes are accessed by either tightening or loosening the head (for example, tight can be Max, and loose can be Low).

Programming Modes:
To have your Quark Tactical memorize a different mode, turn it on and loosen the head by a half-turn. Then, tighten the head at least four times rapidly (twisting it tight, then loose, then tight, etc., four times). After the fourth time, leave the head tight or loose depending which position you want to program.

After three seconds, the light will flash, signaling it is ready to be programmed. Cycle through the eight available modes by clicking the tailcap off and on. The mode sequence is as follows:

Moonlight - Low - Medium - High - Max - SOS - Strobe - Beacon

Once you find your desired mode, leave that mode on for ten seconds and the light will flash again, confirming that the mode has been memorized. To cancel programming before it flashes, turn the light off for three seconds.