BRANDS

• 4 SEVENS
• ARMYTEK
• DEREELIGHT
• EAGLETAC
• FENIX
• GLO TOOB
• HDS SYSTEMS
• ITP LIGHT
• ICON
• JETBEAM
• KLARUS
• LED LENSER
• LUMAPOWER
• LUMINTOP
• MAGLITE
• MAXPEDITION
• NITECORE
• OLIGHT
• PELICAN
• PHOTON MICRO
• SUNWAYMAN
• SUREFIRE
• THRUNITE
• WOLF EYES
• ZEBRALIGHT

CATEGORIES

• BATTERIES
• ACCESSORIES
• LANTERNS
• MULTI TOOLS
• GUN LIGHTS
• 550 PARACORD
• BIKE MOUNT

> 4SEVENS > QUARK AA 2 TACTICAL

4sEVENS qUARK AA 2 Tactical S2

The 4Sevens Quark AA 2 Tactical S2 is powered by two AA batteries and has a maximum output of 180 lumens. Comes packaged in a smart presentation box with free Duracell batteries

The Quark Tactical range of lights operate with a significantly different user interface than the regular Quarks. This UI allows the user to program both primary and secondary outputs.

Featuring five power levels plus strobe and SOS setting. Maximum output of 180 lumens on full power and new moonlight setting of 0.6 lumens, which will run for 30 days on a single set of batteries.

Includes belt holster, removable pocket clip, lanyard, finger grip and spare o-rings.

Out of stock: £48.95 Including free Battery

Specifications

• Powered by 2 AA batteries (included)
• LED Emitter: Premium Cree S2
• Voltage range: 0.9V ~ 4.2V
• 5 Current Regulated Output Levels
• 3 Flash modes: Strobe, SOS, Beacon
• Square threads for lifetime smooth operation
• Type III Hard Anodized finish
• Fully knurled
• Reversible / Removable Clip
• Flexible & secure hand grip accessory
• IPX-8 Waterproofing
• Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
• T-6061 Aircraft-grade Aluminum Body
• Stands on Tail (candle mode)

Typical Output Levels and Runtimes + (LED drive current)

Moonlight: 0.6 lumens for 30 days (1ma)
Low: 4 OTF lumens for 5 days (10ma)
Medium: 22 OTF lumens for 24 hours (50ma)
High: 85 OTF lumens for 5 hours (250ma)
Max: 180 OTF lumens for 42 minutes hours (350ma)
Strobe: 180 OTF lumens for 1.5 hours
Beacon: 0-180 OTF lumens pulse for 18 hours

Operation

Operating your Quark AA 2 Tactical is simple. Insert the battery with the positive side towards the head. Make sure the head and tailcap are tightened, then depress the tailcap button fully so that it "clicks" and the light turns on. You can also press the tailcap lightly (you don't have to "click" it on) to activate the light momentarily. This is known as the momentary-on feature.

The Quark Tactical can memorize any two modes of output, from its eight total modes, to be instantly available. These two memorized modes are accessed by either tightening or loosening the head (for example, tight can be Max, and loose can be Low).

Programming Modes:
To have your Quark Tactical memorize a different mode, turn it on and loosen the head by a half-turn. Then, tighten the head at least four times rapidly (twisting it tight, then loose, then tight, etc., four times). After the fourth time, leave the head tight or loose depending which position you want to program.

After three seconds, the light will flash, signaling it is ready to be programmed. Cycle through the eight available modes by clicking the tailcap off and on. The mode sequence is as follows:

Moonlight - Low - Medium - High - Max - SOS - Strobe - Beacon

Once you find your desired mode, leave that mode on for ten seconds and the light will flash again, confirming that the mode has been memorized. To cancel programming before it flashes, turn the light off for three seconds.