BRANDS

• 4 SEVENS
• ARMYTEK
• DEREELIGHT
• EAGLETAC
• FENIX
• GLO TOOB
• HDS SYSTEMS
• ITP LIGHT
• ICON
• JETBEAM
• KLARUS
• LED LENSER
• LUMAPOWER
• LUMINTOP
• MAGLITE
• MAXPEDITION
• NITECORE
• OLIGHT
• PELICAN
• PHOTON MICRO
• SUNWAYMAN
• SUREFIRE
• THRUNITE
• WOLF EYES
• ZEBRALIGHT

CATEGORIES

• BATTERIES
• ACCESSORIES
• LANTERNS
• MULTI TOOLS
• GUN LIGHTS
• 550 PARACORD
• BIKE MOUNT

> 4SEVENS > QUARK AA 2 R5

4sEVENS qUARK AA 2 r5

The 4Sevens Quark AA 2 R5 is powered by two AA batteries and has a maximum output of 206 lumens. Comes packaged in a smart presentation box with free Duracell batteries.

Featuring five power levels plus strobe and SOS setting. Maximum output of 206 lumens on full power and new moonlight setting of 0.2 lumens, which will run for 30 days on a single set of batteries.

One of the most popular 4 Sevens lights, which is ideal for every day carry, traveling or even as a bike light when used with the Twofish Lockblock bike mount.

Includes belt holster, removable pocket clipz, lanyard, finger grip and spare o-rings.

Click here for the new 4Sevens Quark AA2 S2

See the new 4Sevens Quark AA2 S2

Specifications

• Powered by 2 AA batteries (included)
• LED Emitter: Premium Cree XP-G S2
• Voltage range: 0.9V ~ 4.2V
• 5 Current Regulated Output Levels
• 3 Flash modes: Strobe, SOS, Beacon
• Square threads for lifetime smooth operation
• Type III Hard Anodized finish
• Fully knurled
• Reversible / Removable Clip
• Flexible & secure hand grip accessory
• IPX-8 Waterproofing
• Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
• T-6061 Aircraft-grade Aluminum Body
• Stands on Tail (candle mode)

Typical Output Levels and Runtimes + (LED drive current)

Moonlight: 0.6 lumens for 53 days (1ma)
Low: 4 OTF lumens for 5 days (10ma)
Medium: 19 OTF lumens for 24 hours (50ma)
High: 83 OTF lumens for 5 hours (250ma)
Max: 177 OTF lumens for 1.3 hours (350ma)
Strobe: 206 OTF lumens for 2.5 hours
Beacon: 0-206 OTF lumens pulse for 18 hours

Operation

Operating your Quark AA 2 is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the 'head' of the light) and tail cap are tightened, then depress the tail cap button fully so that it 'clicks' and the light turns on.

The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That's it.

You can also cycle through the Quark's other modes just as easily. Lightly depress the button momentarily (you don't need to 'click' it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:

Loosened Bezel: Moonlight - Low - Medium - High - SOS - Beacon

Tightened Bezel: Max - Strobe

Once the Quark has been turned off for at least three seconds, it will revert to the first level of output in the sequence, either Moonlight or Max.