BRANDS
- 4 SEVENS
- ARMYTEK
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES
> 4SEVENS > QUARK 123 TACTICAL
4Sevens Quark 123 Tactical R5
The 4Sevens Quark 123 Tactical R5 uses a single CR123A battery and has a maximum output of 206 'out the front' lumens.
The Quark Tactical range of lights operate with a significantly different user interface than the regular Quarks. This UI allows the user to program both primary and secondary outputs.
Features non-removable pocket clip.
Includes belt holster, lanyard, finger grip and spare o-rings.
iN sTOCK nOW: £48.95 Including free Battery
Specifications
- Powered by: 1 CR123A battery (included)
- LED Emitter: Premium Cree XP-G R5
- Voltage range: 0.9V ~ 4.2V
- Dimensions
- Length: 3.2 inches
- Diameter: 0.86 inches
- Weight: 1.4 ounces
- 5 Current Regulated Output Levels
- 3 Flash modes: Strobe, SOS, Beacon
- Momentary Activation
- Level Memorization
- Square threads for lifetime smooth operation
- Type III Hard Anodized finish
- Fully knurled
- Convenient Clip (Note: The Quark 123 is the only Quark light on which the clip cannot be removed because of its small size.)
- Flexible & secure finger grip accessory
- IPX-8 Waterproofing
- Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-eflective coating on the inside for optimal efficiency and durability.
- T-6061 Aircraft-grade Aluminum Body
Typical Output Levels and Runtimes + (LED drive current)
Moonlight: 0.2 lumens for 15 days, (1ma)
Low: 4 lumens for 2.5 days (10ma)
Medium: 22 lumens for 13 hours (50ma)
High: 85 lumens for 2.7 hours (250ma)
Max: 206 lumens for 0.8 hours (700ma)
Strobe: 206 lumens for 1.6 hours
Beacon: 0-206 lumens pulse for 12 hours
Operation
Operating your 4 Sevens Quark Tactical is simple. Insert the battery with the positive side (+) towards the head. Make sure the head and tailcap are tightened, then depress the tailcap button fully so that it "clicks" and the light turns on. You can also press the tailcap lightly (you don't have to "click" it on) to activate the light momentarily. This is known as the momentary-on feature.
The Quark Tactical can memorize any two modes of output, from its eight total modes, to be instantly available. These two memorized modes are accessed by either tightening or loosening the head (for example, tight can be Max, and loose can be Low).
Programming Modes:
To have your Quark Tactical memorize a different mode, turn it on and loosen the head by a half-turn. Then, tighten the head at least four times rapidly (twisting it tight, then loose, then tight, etc., four times). After the fourth time, leave the head tight or loose depending which position you want to program.
After three seconds, the light will flash, signaling it is ready to be programmed. Cycle through the eight available modes by clicking the tailcap off and on. The mode sequence is as follows:
Moonlight - Low - Medium - High - Max - SOS - Strobe - Beacon
Once you find your desired mode, leave that mode on for ten seconds and the light will flash again, confirming that the mode has been memorized. To cancel programming before it flashes, turn the light off for three seconds.