BRANDS

• 4 SEVENS
• ARMYTEK
• DEREELIGHT
• EAGLETAC
• FENIX
• GLO TOOB
• HDS SYSTEMS
• ITP LIGHT
• ICON
• JETBEAM
• KLARUS
• LED LENSER
• LUMAPOWER
• LUMINTOP
• MAGLITE
• MAXPEDITION
• NITECORE
• OLIGHT
• PELICAN
• PHOTON MICRO
• SUNWAYMAN
• SUREFIRE
• THRUNITE
• WOLF EYES
• ZEBRALIGHT

CATEGORIES

• BATTERIES
• ACCESSORIES
• LANTERNS
• MULTI TOOLS
• GUN LIGHTS
• 550 PARACORD
• BIKE MOUNT

> 4SEVENS > QUARK 123 2

4sEVENS qUARK 123 2 Cree S2 LED

The 4Sevens Quark 123 2 R5 uses a two CR123A batteries and has a maximum output of 230 'out the front' lumens.

Featuring five power levels plus strobe and SOS setting.

Includes belt holster, lanyard, finger grip and spare o-rings.

Out of stock: £55.95 Including free Batteries

Specifications

• Powered by: 2 CR123A batteries (included)
• LED Emitter: Premium Cree XP-G S2
• Voltage range: 3.0V ~ 9.0V
• Dimensions
• Length: 4.5 inches
• Diameter: 0.86 inches
• Weight: 1.8 ounces
• 5 Current Regulated Output Levels
• 3 Flash modes: Strobe, SOS, Beacon
• Square threads for lifetime smooth operation
• Type III Hard Anodized finish
• Fully knurled
• Reversible/Removable Clip
• Flexible & secure hand grip accessory
• IPX-8 Waterproofing
• Impact-resistant glass lens with Dual-coating - sapphire coating on the outside and anti-reflective coating on the inside for optimal efficiency and durability.
• T-6061 Aircraft-grade Aluminum Body
• Stands on Tail (candle mode)

Typical Output Levels and Runtimes + (LED drive current)

Moonlight: 0.9 OTF lumens for 30 days, (1ma)
Low: 4 OTF lumens for 5 days (10ma)
Medium: 22 OTF lumens for 20 hours (50ma)
High: 85 OTF lumens for 4.5 hours (250ma)
Max: 200 OTF lumens for 2 hours 45 minutes (990ma)
Strobe: 200 OTF lumens for 3 hours
Beacon:0-200 OTF lumens pulse for 23 hours

Operation

Operating your Quark 123 2 is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the bezel (the 'head' of the light) and tail cap are tightened, then depress the tail cap button fully so that it 'clicks' and the light turns on.

The two most commonly used modes are Max and Moonlight, the highest and lowest modes. To access Max, you simply tighten the bezel. To access Moonlight, you just loosen the bezel a half-turn. That's it.

You can also cycle through the Quark's other modes just as easily. Lightly depress the button momentarily (you don't need to 'click' it off) and the output will switch to the next mode. The mode sequence is determined by whether the bezel is tightened or loosened:

Loosened Bezel: Moonlight - Low -> Medium - High - SOS - Beacon

Tightened Bezel: Max - Strobe