BRANDS
- 4 SEVENS
- ARMYTEK
- BALDER
- DEREELIGHT
- EAGLETAC
- FENIX
- GLO TOOB
- HDS SYSTEMS
- ITP LIGHT
- ICON
- JETBEAM
- KLARUS
- LED LENSER
- LUMAPOWER
- LUMINTOP
- MAGLITE
- MAXPEDITION
- NITECORE
- OLIGHT
- PELICAN
- PHOTON MICRO
- ROFIS
- SOLARFORCE
- SUNWAYMAN
- SUREFIRE
- THRUNITE
- WOLF EYES
- ZEBRALIGHT
CATEGORIES

4Sevens Preon 1 Titanium S2
The 4Sevens Preon 1 Titanium is compact, absurdly bright, lightweight and elegant.
Three primary levels of output and three special modes of output. Twist head operation.
High Level 60 ANSI Lumens, Medium 13 lumens and low level of 2 lumens,
The worlds first AAA powered, CREE XP-G flashlight!
Includes pocket clip and spare o-rings.
Temp out of stock: £44.95 Including free Battery

Specifications
- LED: CREE XP-G S2
- Max Output: 60 ANSI Lumens
- Material: Titanium
- Lens: Optical-grade glass lens with anti-reflective coating on both sides
- Battery: One AAA, included (see voltage range to select acceptable batteries for this light)
- Operating Voltage Range: 0.9V-3.0V
- Seven Output Modes:
- Low: 2 OTF Lumens, 23 hours
- Medium: 13 OTF Lumens, 6 hours
- High: 60 ANSI Lumens, 37 minutes
- Strobe 1.6 hours
- SOS 2.4 hours
- Beacon (Hi) 8 hours
- Beacon (Lo) 40 hours
- Dimensions: Length: 2.95 inches Diameter: 0.55 inches Weight: 0.6 ounces
- Waterproof: IPX-8 Rating

4 Sevens Preon 1 Titanium Operation
Operating your Preon 1 is simple. Make sure its batteries are inserted with the positive side (+) toward the head. Ensure the tailcap is tightened. To turn the Preon on, tighten the bezel (the ‘head’ of the light) fully down. The Preon will turn on when the bezel is fully tightened, and turn off when the bezel is loosened.
Selecting Regular Outputs
To select a different level of constant output, turn the Preon off and then on again within 1 second. This will select the next level of constant output in the following sequence:
Low - Medium - High
If the Preon is turned off for 2 seconds or longer, it will revert back to Low.
Selecting Special Outputs
The Preon has 4 special output modes: Strobe, S.O.S., Beacon (Hi), and Beacon (Lo). To access these modes, quickly switch through two full 'cycles' of the regular outputs, starting with Low. These two full cycles must be completed within 3 seconds:
Low - Medium - High - Low - Medium - High - Special Outputs
You can continue to cycle through the special outputs in the following sequence:
Strobe - S.O.S. - Beacon (high) - Beacon (low)
After Beacon (Lo) mode, the output reverts back to Regular Low. Both Beacon modes will first flash 5 times and then once every 10 seconds.